| |
HISTORY
| 29/01/2012 - Version 3.4 |
- Released FiatECUScan MULTIPLEXED version with special multiplexing interface and license locked to the interface
- Released FES mobile 2.0 with full support for same cars/modules/functions as FiatECUScan (except Adjustments)
- Added support for FIAT ALBEA and ALFA SPIDER '06
- Improved support for ELM 327 and OBDKey interfaces
- Added full support for OBDLink interfaces
- Fixed actuators/adjustments execution problems on many ECUs
- Fixed "alarm mode" and "blinkers on/off" functions on Grande Punto and Mito
- Fixed "Logistic Mode ON/OFF" function on many models
- Added "Abort" function while executing actuators/adjustments
- Added SCAN DTCs function (works the same way as the SCAN function but checks each module for error codes)
- Added more PROXI Configuration options and improved PROXI function
- Support for Bosch Motronic MeD7.6.2 CF4/EOBD Injection (159/Brera 3.2V6) (Full support)
- Support for Magneti Marelli IAW 8GMF CF5/EOBD Injection (Punto Evo/Mito 1.4 16V) (Full support)
- Support for Bosch Motronic MeD17.3.1 CF5/EOBD Injection (Giulietta) (Info and DTC only)
- Support for Hella XENON headlamps (Thesis)
- Support for Webasto Hood Control (Spider '06)
- Support for Marelli Body Computer (Guilietta, Ducato) (Info and DTC only)
- Support for Delphi Body Computer (Ypsilon 2011) (Info and DTC only)
- Support for Marelli climate control (Giulietta) (Info and DTC only)
- Support for Marelli climate control (Ypsilon 2011) (Info and DTC only)
- Support for Harrison climate control (156)
- Support for old Allied signal airbags (Marea, 156)
- Support for old BREED airbags (Bravo/Brava)
- Added the ability to read DTC details (parameter values when the error was detected)
- Support for DTC Details of Bosch EDC15C7 CF3/EOBD Diesel Injection
- Support for DTC Details of Marelli 6F3 EOBD Diesel Injection
- Support for DTC Details of Bosch Motronic M1.5.5 Injection
- Support for DTC Details of Bosch ABS 5.7
- Support for DTC Details of Bosch ABS 8
- Support for DTC Details of Marelli SELESPEED CFC208F Automatic Gearbox
- Support for DTC Details of Marelli SELESPEED CFC209F Automatic Gearbox
|
| 15/10/2011 - Version 3.3 |
- Added support for FIAT SEDICI, FIAT UNO 2010, LANCIA YPSILON 2011, FIAT 500 0.9 TWIN AIR TURBO, FIAT LINEA 1.6 16V and 1.8 16V
- Added DOBLO' and DUCATO chasis type for easier identification
- Added 'Functioning time' and 'Operating time' parameters to all Grande Punto, Punto Evo, 500, Mito, Giulietta modules
- Improved SCAN function
- Added PROXI / Can Setup support for more cars
- Added more PROXI Configuration options and improved PROXI function
- Support for Marelli Instrument Panel (Bravo, Linea, Delta)
- Support for Mannesman VDO Instrument Panel (147, GT)
- Support for Marelli Instrument Panel (Musa, Idea)
- Support for Marelli Instrument Panel (Palio RST)
- Support for Marelli Instrument Panel (Palio RST2)
- Support for Service Interval Reset (Palio RST2)
- Support for Service Interval Reset (Palio FLP)
- Support for Service Interval Reset (Ducato FL)
- Support for Service Interval Reset (Ypsilon 2011)
- Support for Lauberhorn Convergence C1 (Bravo, Linea, Idea, 159, Delta, Ypsilon, Musa) (Info and DTC only)
- Support for TRW Airbag (Ep - PROXI) (Ducato FL)
- Support for CONTINENTAL Airbag (PROXI) (Bravo'07)
- Support for Bosch EDC16C39 CF4/EOBD Diesel Injection (1.9 8V) (Grande Punto)
- Support for Bosch EDC16C39 CF4/EOBD Diesel Injection (1.9) (Sedici)
- Support for Bosch EDC16C39 CF5/EOBD Diesel Injection (2.0 16V) (Sedici)
- Support for Bosch ABS/ESP (Sedici) (Info and DTC only)
- Support for SIEMENS Airbag (Sedici) (Info and DTC only)
- Support for Mitsubishi Electric Power Steering (Sedici) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF3 CF4/EOBD Injection (Grande Punto, 1.2 8V/1.4 8V) (Full support)
- Support for Magneti Marelli IAW 5SF8 CF5/EOBD Injection (500/Grande Punto/Punto Evo 1.2 8V/1.4 8V) (Full support)
- Support for Magneti Marelli IAW 5SF9 CF5/EOBD Injection (500/ Punto Evo 1.2 8V/1.4 8V) (Full support)
- Support for AISIN YLII 5 Automatic Gearbox (Croma, 166, Thesis)
|
| 08/08/2011 - Version 3.2 |
- Added Bulgarian data language
- Added support for ALFA GIULIETTA
- Fixed a bug in error reading code for some old ECUs which caused the program to hang
- Added possibility to record non-numeric data in the CSV export files
- Fixed 'simulation' mode not activating with CRTL+mouse click on CONNECT button
- Added more PROXI configuration options and improved PROXI procedure
- Support for Fiat Ducato Service Interval Reset
- Support for Delphi climate control/Single zone (147/GT) (Full support)
- Support for Delphi climate control/Dual zone (147/GT) (Full support)
- Support for Delphi climate control (156) (Full support)
- Support for Marelli Connect (All models) (Info and DTC only)
- Support for Marelli/Microsoft Convergence (All models) (Info and DTC only)
- Support for Lauberhorn Convergence (500, Punto Evo, Doblo) (Info and DTC only)
- Support for Valeo parking control (Grande Punto, Punto Evo, 500, Mito, Giulietta)
- Support for Valeo parking control 2 (Delta)
- Support for Bosch parking control (Bravo, Linea, Ducato)
- Support for Selespeed CFC328 Automatic Gearbox (Grande Punto, Punto Evo, 500)
- Support for Marelli 8DF CF5/EOBD Diesel Injection (1.3) (Grande Punto, Punto Evo, 500, Doblo, Mito)
- Support for Bosch MSA 11 Diesel Injection (2.4) (Marea 2.4TD/K 2.4TD) (Full support) (Fixed the problem with connection to this module)
- Support for Marelli Instrument Panel Base/Comfort (Punto, Panda, Idea, Doblo, Musa)
- Support for Bosch Motronic MeD7.6.1 CF4/EOBD Injection (159/Brera 1.9JTS/2.2JTS) (Full support)
- Support for Siemens navigator/ICS instrument (Alfa 166) (Info and DTC only)
- Support for ZF 4HP20 Automatic Gearbox (Alfa 166/Lancia K)
|
| 11/07/2011 - Version 3.1 |
- Support for Valeo XENON headlights (Alfa 166)
- Added Odometer writing support on all Instrument Cluster modules
- Added possibility to manually enter service info (Date of last service, days till next service, distance till next service, etc.)
- Fixed Serbian language files
|
| 04/07/2011 - Version 3.0.4 |
- Improved connection stability with VagCom/KKL interfaces
- Fixed a problem with connection to some modules in Grande Punto, 500, Punto Evo and Mito
- Added Cruise Control activation for Grande Punto (in PROXI Alignment)
- Added a number of PROXI configuration options for 159, Bravo '07, Delta, Stilo and Croma
- Added function to clear recent vehicles list (in Settings)
- Improved navigation with arrow keys on the Graph
- Improved VagCom/KKL stability
|
| 09/06/2011 - Version 3.0 |
- Improved connection stability with VagCom/KKL interfaces
- Improved support for 800x600 screens
- Added graph scrolling with left/right arrow keys
- Improved graph precission and added setting to control redraw frequency
- Added function to display miles instead of kilometers
- Fixed the problem with high memory usage and slow loading on Windows 7 x64
- Improved vehicle scan function
- Improved interface message before connection. It now displays the required pin/switch and properly identifies which vehicles require 3-pin adapter.
- Added Portuguese(BR) data language
- Added more PROXI configuration options
- Support for Bosch Motronic Me7.6.3 CF4/EOBD Injection (Panda '06 1.4 16V)
- Support for Bosch EDC16C39 CF5/EOBD Diesel Injection (Grande Punto/Punto Evo/Doblo/Mito 1.6MJET/2.0MJET)
- Support for Autoliv MY99 Airbag
- Support for Delphi climate control (Info and DTC only)
- Support for Marelli climate control (Info and DTC only)
- Support for Borletti/Hella climate control (Info and DTC only)
- Support for Denso climate control (Info and DTC only)
- Support for Valeo climate control (Info and DTC only)
- Support for BOSCH Airbag 2 (Doblo) (Info and DTC only)
- Support for TRW Airbag (Ducato) (Info and DTC only)
- Support for Marelli/Finmek Body Computer (Ypsilon) (Info and DTC only)
- Support for Marelli Body Computer MY03 (Punto '03/Doblo) (Info and DTC only)
- Support for Marelli Body Computer (Idea/Musa/Palio) (Info and DTC only)
- Support for Marelli Body Computer (Linea/Idea/Brera/Musa/Ypsilon) (Info and DTC only)
- Support for Bosch ABS 8 ESP (500/Grande Punto/Punto Evo/Mito) (Info and DTC only)
- Support for Continental MK60EC ABS (Doblo) (Info and DTC only)
- Support for Bosch MSA 11 Diesel Injection (2.4) (Marea 2.4TD/K 2.4 TD) (Info and DTC only)
- Support for Bosch Motronic M1.7 Injection (155/164/Thema/Croma) (Info and DTC only)
- Support for Magneti Marelli IAW 4SF Injection (Linea/Palio, 1.4 8V/1.8 8V/1.9 16V/1.0 8V) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF CF4/EOBD Injection (Linea/Idea/Doblo/Ypsilon/Musa 1.4 8V/1.2 8V) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF3 CF4/EOBD Injection (Grande Punto, 1.2 8V/1.4 8V) (Info and DTC only)
- Support for Magneti Marelli IAW 4SFG Injection (Palio 1.4 8V) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF4 Natural Power Injection (Ducato 3.0 16V) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF8 CF5/EOBD Injection (Panda 1.2 8V) (Info and DTC only)
- Support for Bosch Motronic MeD7.6.1 CF4/EOBD Injection (159/Brera 1.9JTS/2.2JTS) (Info and DTC only)
- Support for Bosch Motronic MeD7.6.2 CF4/EOBD Injection (159/Brera 3.2V6) (Info and DTC only)
- Support for Bosch Motronic Me7.9.10 CF5/EOBD Injection (Bravo/Linea/Delta/Musa 1.4 16V) (Info and DTC only)
- Support for Bosch Motronic MeD17.3.1 CF5/EOBD Injection (159/Brera/Delta 1.8JTS) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF8 CF5/EOBD Injection (500/Grande Punto/Punto Evo 1.2 8V/1.4 8V) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF9 CF5/EOBD Injection (500/ Punto Evo 1.2 8V/1.4 8V) (Info and DTC only)
- Support for Magneti Marelli IAW 5SF8 Natural Power Injection (Grande Punto/Punto Evo 1.4 8V) (Info and DTC only)
- Support for Magneti Marelli IAW 8GMF CF5/EOBD Injection (Punto Evo/Mito 1.4 16V) (Info and DTC only)
- Support for Magneti Marelli IAW 5AF GAS Injection (Panda/Punto BiPower) (Info and DTC only)
- Support for Magneti Marelli IAW 4AF/4EF GAS Injection (Multipla/Doblo BiPower) (Info and DTC only)
|
| 08/05/2011 - Version 2.8.2 |
- Fixed the connection problems with earlier Hitachi ECUs
- Support for Siemens Body Computer (Panda)
- Support for Selespeed CFC228F Automatic Gearbox (Punto, Panda, Idea, Musa, Ypsilon)
- Released FES mobile 1.0.1 with some minor fixes
|
| 03/05/2011 - Version 2.8.1 |
- Improved PROXI Alignment Procedure stability
- Improved communication stability for Grande Punto, Punto Evo, 500, Mito
- Added Fiat Panda PROXI Alignment procedure
- Released FES mobile 1.0 - Windows Mobile Fiat/Alfa/Lancia diagnostics software
|
| 01/05/2011 - Version 2.8 |
- Fixed a problem with PROXI Alignment Procedure in Fiat Bravo '07, Croma, Alfa 159, Alfa GT, Alfa 147
- Improved PROXI Alignment Procedure
- Support for AISIN AF40-6 Automatic Gearbox (Croma, 159, Brera, Delta)
- Support for Delphi Body Computer (Grande Punto, Punto Evo, 500, Qubo, Doblo, Mito)
- Support for Marelli Instrument Panel (Grande Punto, Punto Evo, 500, Qubo, Doblo, Mito)
- Support for Marelli Instrument Panel (Croma)
- Support for Siemens Instrument Panel (159/Brera)
- Support for Marelli Body Computer (Bravo, Delta)
- Added Service coupons function for Stilo to set the number of remaining service coupons
- Improved touchscreen support
- Added Logistic mode (supplier low-power mode) deactivation function (Grande Punto, Punto Evo, 500, Doblo, Mito, Bravo, Delta)
- Support for Bosch XENON headlights
- Support for Valeo XENON headlights
- Support for Litronic XENON headlights
- Support for Selespeed CFC300 Automatic Gearbox (Grande Punto, Punto Evo, Qubo)
- Support for EDC16C39/CF5 Diesel Injection(1.6, 1.9, 2.0 engines - Bravo, Delta, Linea, 159)
- Added PROXI Alignment Procedure for Grande Punto, Punto Evo, 500 and Mito (still in experimental mode)
- Fixed IMA injector coding function for Grande Punto, Punto Evo, 500 and Mito
- Added Grande Punto, Punto Evo, 500 and Mito support with OBDKey interface
- Fixed a problem with DTC reading on Bosch Monomotronic MA1.7.3
- Fixed "Air quantity" reading on Bosch Motronic M2.10.4
|
| 03/03/2011 - Version 2.7.2 |
- Fixed a problem with PROXI Alignment Procedure in Fiat Bravo '07, Croma, Alfa 159, Alfa GT, Alfa 147
|
| 27/02/2011 - Version 2.7.1 |
- Fixed a problem with crash on connection when only one interface is defined in Settings
- Fixed wrong error codes in Bosch ABS Teves MK20/MK70
- Improved support for Bluetooth OBDKey interfaces
|
| 19/02/2011 - Version 2.7 |
- Fixed a problem with Remote Control programming
- Fixed the RPM calculation in Bosch Motronic ME7.3H4
- Support for TRW MY05, AUTOLIV MY06, AUTOLIV MY07 and SIEMENS MY06 Airbags (Grande Punto, Punto Evo, 500, QUBO, MITO)
- Support for Hitachi MPI Injection (pre-98 vehicles)
- Support for Bosch Monomotronic MA1.7.3 Injection
- Added [Recent] option for vehicle selection
- Added search when typing for vehicle selection
- Added "tool-tips" for the buttons. The messages for the tool-tips can be modified/translated from the language files.
- Added Select All/Select None buttons on Parameters screen
- Added monitoring of error codes in Parameters and Graph screens and recording of the error codes in the generated CSV logs.
- Fixed a problem with the scaling on the graph screen.
- Added current values display on a graph when the user clicks on it with the mouse.
- Improved PROXI procedure support
- Added more configuration options for PROXI procedure (Stilo, Punto, 147)
- Added command-line switch /t=XX where XX is a template number. This switch causes the program to connect to last ECU and load the selected template. (So, when you run "FiatECUScan2 /t=1" then the program will start, connect to the last ECU, go to Parameters screen and load template 1.)
- Added interface auto-selection. You can define up to 4 interfaces in Settings. Then when you click "Connect" the program will first check which of the interfaces is connected to the computer and will use that interface for connection to the vehicle. If there is only 1 interface defined in Settings then the program works without auto-selection.
- Added interface lookup function in Settings. This function will automatically identify the type of interface, port and port speed of your interface(s). The interface has to be powered (connected to vehicle).
- Added full support for the USB OBDKey 1.40 interface which is in official production now. This interface cannot be used for Fiat Grande Punto, Alfa MITO and Fiat 500 yet.
- Added support for the Bluetooth OBDKey 1.40 interface. There are still some stability issues with the Bluetooth interface, so the USB unit is recommended.
- Added "PLEASE CONNECT ADAPTER XX" messages before connecting to ECU. For the users who do not use adapter cables the message can be disabled from Settings.
|
| 04/12/2010 - Version 2.6.1 |
- Fixed a problem with Grande Punto, 500, MITO, Punto Evo support. It was not working with some ELM interfaces
- Fixed a few problems in PROXI Alignment (CAN Setup) Procedure. It was working only in english and it failed on some vehicles
- Added CAN Info function for Grande Punto, 500, MITO, Punto Evo
- Fixed a problem with VagCom interfaces (This problem exists only in version 2.6)
|
| 27/11/2010 - Version 2.6 |
- Added support for Grande Punto, 500, MITO, Punto Evo
- Added PROXI Alignment (CAN Setup) Procedure
- Added Stilo Dashboard Cruise Control Light Activation
- Added Bosch Motronic Me7.9.10 CF5/EOBD Injection (1.4 16V) (Grande Punto, 500, MITO) support
- Added Marelli 6F3 EOBD Diesel Injection (Grande Punto, 500, MITO) support
- Added Service Interval Reset for Grande Punto, 500, MITO
- Added DELPHI Electric Steering (Grande Punto, 500, MITO) support
- Added Full support for Bluetooth ELM 327 interfaces
- Added faster parameter monitoring support with VagCom interfaces
|
| 05/10/2010 - Version 2.5 |
- Fixed the problem with ME 3.1 and VagCom interface
- Added function to detect available serial ports in the system
- Changed FREE version to show in red the modules that are not free
- Added CAN Info function (shows CAN configuration)
- Added Bosch Motronic M2.10.3 support
- Added Bosch Motronic M3.7.1 support
- Added TRW Electric Power Steering (Croma) support (also in FREE version)
- Added SAGEM Power Steering (Thesis, Ducato) support
- Added Marelli Body Computer (Thesis) support
- Added Nippon Instrument Panel (Thesis) support
- Added Lancia Thesis Service Interval Reset
- Added Lancia Ypsilon Service Interval Reset
- Added Siemens VDO Instrument Panel (Ypsilon) support
- Added SELESPEED CFC218F Automatic Gearbox (156 GTA) support
- Added ABS Teves MK20/MK70 (Brava/Bravo) support (also in FREE version)
- Added Bosch ABS 5.3 ASR/TC(Punto, Ducato, 156 GTA, 166, GTV, SPIDER, LYBRA) support
|
| 06/09/2010 - Version 2.4.1 |
- Fixed missing Danish language files
- Fixed a problem with License Transfer function
- Added latest Czech and Italian language files
|
| 28/08/2010 - Version 2.4 |
- Added partial support for OBDKey interface (CAN modules are not fully supported yet)
- Added Bosch Motronic M2.10.4 support
- Added Bosch Motronic ME 2.1 support
- Added Bosch Motronic MED7.11 support
- Added Alfa 147/GT Body Computer support
- Added Alfa 159 Body Computer support
- Added Fiat Croma Body Computer support
- Added Autoliv MY06 Airbag (Linea, Ypsilon) support
- Added SIEMENS MY06 Airbag (Bravo, Delta) support
- Added idle actuator reset for Bosch Motronic M1.5.5
- Added phonic wheel learn reset for Marelli IAW 4AF/4EF/59F/5AF
- Added Bosch ABS8/ABS57 calibration functions
- Fixed Bosch ABS 8 actuator problems
|
| 28/06/2010 - Version 2.3.1 |
- Fixed an issue with the FREE version of the program
- Added support for an early version of Selespeed gearbox (also known as CFC202)
|
| 20/06/2010 - Version 2.3 |
- Added Turkish and Dutch data languages
- Moved all data messages into external text files
- Added Transfer License function that allows users to unregister the program from one computer and register it on another one
- Added SCAN function (scans the vehicle for all supported modules)
- Added Remote control programming function (Stilo and Punto Mk2)
- Improved ELM327 Bluetooth support, but still too unstable and not recommended
- Improved Stilo/Punto blinkers activation/deactivation function
- Added option to change screen fonts from Settings window
- Fixed the problem with Templates and Tags not showing on screen
- Changed the naming of log and csv auto-export files to include vehicle make/model
- Added Bosch Motronic ME7.3H4 support
- Added Lucas EPIC DCU3F Diesel Injection support
- Added Bosch Motronic ME 3.1 (pre-EOBD versions) support
- Added BITRON dirver door, passenger door and boot support
- Added G.E. PROCOND dirver door, passenger door and boot support
- Added TRW dirver door and boot support
- Added TRW Lucas ABS (Croma, Brera, 159, Ypsilon) support
- Revised Selespeed CFC208 & CFC209 calibration functions
- Added calibration functions to Selespeed CFC208(1) (Punto '03, Idea, 147, GT, Ypsilon, Musa)
- Revised EDC16 calibration functions
- Added cruise control re-learn function for EDC15C7
|
| 12/05/2010 - Version 2.2.1 |
- Fixed Injector Coding for EDC16/CF3 engines
|
| 09/05/2010 - Version 2.2 |
- Added Delphi/Marelli Body Computer (Punto MK2) support
- Added Marelli Instrument Panel (Punto MK2) support
- Added Visteon Instrument Panel (Stilo) support
- Added Delphi Electric Steering (non-CAN, Ypsilon, Panda) support
- Added Bosch ME3.1 EOBD (2.0, 2.4, 3.0 V6) support
- Added Valeo parking control support
- Added TRW MY 03 Airbag (CAN) support
- Added support for the new Fiat Bravo
- Added Alfa 159 Service Interval Reset
- Added Alfa Brera Service Interval Reset
- Added Fiat Croma Service Interval Reset
- Added Fiat Linea Service Interval Reset
- Added Fiat Bravo Service Interval Reset
- Added Lancia Delta Service Interval Reset
- Added Injector Coding for JTD engines
|
| 14/04/2010 - Version 2.1 |
- Commercial version released.
- Fixed problems with the airbag communication protocol.
- Fixed the requirement for "Run as administrator" on Vista and Windows 7.
- Added Alfa 147 Service Interval Reset
- Added Alfa GT Service Interval Reset
- Added Fiat Punto '03 Service Interval Reset
- Added Fiat Panda '03 Service Interval Reset
- Added Fiat Idea Service Interval Reset
- Added Fiat Doblo Service Interval Reset
|
| 01/04/2010 - Version 2.0 |
- Rebuilt User Interface. Improved visual experience and fixed UI problems.
- ECUs divided by categories - Engine, ABS, Airbag, etc.
- Connection failure status messages
- ECU calibration routines status messages
- Separation of actuators and adjustments
- ELM 327 v1.3 support
- Multilanguage User Interface
- Multilanguage data (Errors, Parameters, Actuators, Adjustments). The detail descriptions are not translated. Supported languages: English, Deutsch, Italiano, Français, Polski, Český, Magyar, Русский, Español
- Revised error messages.
- Support for parameter templates (a pre-selected group of parameters) which can be loaded with a single key.
- User-configurable graph colors and fonts.
- Support for drawing up to 4 graphs.
- Improved parameter visualizing on the Graph screen.
- Added Min/Max values for the parameters on Graph screen.
- Added support for multiple recordings on the Graph screen
- Added auto-export in CSV of the recordings.
- Added import function for loading of CSV files.
- Added tag support when recording graphs. The users can insert pre-defined tags in the recorded data like: Going uphill, Full throttle, Driving on street xxx, etc.
- Added parameter monitoring on the Actuators screen.
- Added auto-save log of the task performed during diagnostic sessions.
- Added Bosch ABS 5.3 support
- Added Marelli 6JF support
- Added Marelli 6F3 support
- Improved Bosch EDC16/CF4 support
- Improved Marelli SELESPEED CFC209F support
- Added Fiat Stilo Service Interval Reset
- Added Marelli MF Body Computer support
- Added Delphi Electric Steering (Punto MK2) support
|
| 26/01/2010 - Version 1.6 |
- Added Bosch Motronic M1.5.5 support
- Added Bosch Motronic ME7.3.1 support
- Added Bosch Motronic ME7.3H4M support
- Added Hitachi MPI support
- Added Siemens MY99 Airbag support
- Added TRW MY99 Airbag support
- Added ALLIED MY97 support
- Added BREED MY97 support
- Added more EDC6C39 functions
- Fixed IAW49F communication
|
| 13/01/2010 - Version 1.5 |
- Added Bosch EDC 16/CF4 support
- Added Magneti Marelli IAW 5NF support
- Added Lucas DPNC (TD100) support
- Added Siemens MY99 Airbag support
- Added TRW MY97 Airbag support
- Changed CSV column separator to ;
|
| 15/12/2009 - Version 1.4.1 |
- Fixed connection problem with some ECUs
|
| 12/12/2009 - Version 1.4 |
- Added Marelli SELESPEED CFC208F support
- Added Marelli SELESPEED CFC209F support
- Added Lucas EBC 430 ABS support
- Added TRW Electric Power Steering support
- Improved communication stability on slower systems
- Added checking for new versions on starup
|
| 29/11/2009 - Version 1.3 |
- Added Magneti Marelli IAW 4AF/4EF/59F/5AF support
- Added Magneti Marelli IAW 49F support
- Added EDC15 support for 2.0, 2.3, 2.8 engines
- Rebuild user interface. All functions are accessible through keyboard shortcuts.
- Added interface latency detection.
- Improved communication protocol, more stable connection.
|
| 23/11/2009 - Version 1.2.0.0 |
- Added Bosch ABS 8 support
- Added Bosch EDC 16/CF3 support
- Fixed some errors in EDC15 data
- Added alpha sorting in parameters view
|
| 18/11/2009 - Version 1.1.0.0 |
- Added Bosch ABS 5.7 support
- Reorganized vehicle database
- Added ISO Code validation
- Fixed a bug that was causing program crashes on some systems
|
| 29/10/2009 - Version 1.0.0.0 released |
|
|
|
|